ریلها و مسیرهای راهنمای نوار نقاله
Guide and support-track components for product, belt or chain paths in straight and curved conveyors.
نمای کلی اجزا
Guide and support-track components for product, belt or chain paths in straight and curved conveyors.
Treat Conveyor Guide Rails & Tracks as part of the conveyor interface. A reliable quotation starts with the belt or chain identity plus the dimensions and mounting details that this component has to match.
Define what the guide touches
A guide can touch the conveyed product, the belt/chain edge or a return/support surface. Those jobs use different sections and clearances. State the function before comparing dimensions. For radius conveyors, the inner/outer guide geometry is part of the belt path and should be reviewed with the curve radius and belt width.
Specification checklist
| Item | RFQ detail |
|---|---|
| Moving/contact component | Product, belt or chain |
| Guide / track section | Drawing or section dimensions |
| مسیر نقاله | Straight, return or curve |
| Curve geometry | Radius and angle where applicable |
| Length and quantity | Cut length or total metres |
| Mounting | Carrier, fastener and frame detail if available |
Product guiding and belt guiding are different jobs
A product guide controls cartons, bottles or parts above the conveying surface. A belt or chain guide locates the moving conveyor component itself. The contact height, profile and loading are therefore different. State which job the rail performs and whether the product is expected to accumulate against it.
For curve systems, the guide path should be checked together with belt/chain width and inside radius. Local tight spots can create high edge load even when the nominal curve radius is correct.
بررسیهای جایگزینی و بازرسی
| بررسی | چه چیزی را ثبت کنیم |
|---|---|
| Contact surface | Show what rides on or against the guide |
| Section | Measure all critical legs/lips |
| Mounting | Record carrier/fasteners |
| Curve | Inside/outer guide radius and angle if used |
سوالات متداول
Is a product guide the same as a belt guide?
Not necessarily. Identify which component contacts the rail and how it is mounted.
What should I send for a curved track?
A plan view with radius/angle plus a section or clear profile photograph is most useful.
درخواست مجموعه کامپوننت منطبق
For Conveyor Guide Rails & Tracks, send your belt or chain identification, dimensions, quantity and conveyor interface. A photo or drawing is especially useful when the existing component is being replaced.
